SUPA

A cost effective polypropylene conduit offering increased flexibility over uPVC conduit.

Rated ‘Very Light Duty’ protection (AS/NZS: 2053)

  • Low compression Resistance
  • Medium Impact Resistance


Performs to cooler service temperatures
(-5 to 60°)

 

AVAILABLE IN A RANGE OF SIZES


 

 

 

 

 

 

Why Marley?

Quality Assurance
Practices & procedures to deliver on customer expectations

Proven Reliability
History of durability in NZ conditions

Recyclable
100% recyclable uPVC and PE materials

Certification
Made to NZ standards & specifications

Full Range
Wide range of cable enclosures & fittings for Conduit, Duct, Trunking & Air Con systems

Support
Nationwide sales and technical support

Components

 PRODUCTS

SUPA Flexible Conduit

Conduit glands

Plain to screw adaptors

Saddle

For joining SUPA:
– Use conduit glands, and plain to screw adaptors.
– Not suitable for use with uPVC solvent.

Resources

Technical Details

SUPAEASISOLA
Colours availableGreyGreyGrey
MaterialPolypropyleneuPVCuPVC
Sizes available20, 25mm20 – 50mm20 – 32mm
Comply with AS/NZS
standard
205320532053/5033
Duty rating**Very light dutyMedium dutyHeavy duty
Compression resistance**LowMediumHigh
Impact resistance**MediumHighHigh
Long-term outdoor useNoNoYes
Temperature range**-5°C to +60°C-5°C to +60°C-5°C to +60°C
BEP certifiedN/AYesYes
Marley solvent needed to
join
N/AYesYes
Chemical resistanceHigh*High*High*
Suitable fittingsYesYesYes

* Avoid contact with ketones, esters, aromatic and chlorinated solvents

** As per manufacturing standard AS/NZS 2053

 

INSTALLATION OF SUPA FLEXIBLE CONDUIT
Marley SUPA is designed for use only in above ground applications.

Fixing
Where conduits are to be surface mounted, secure to the building fabric with the correct size saddles or conduit clips using zinc plated or stainless steel screws into wood or masonry anchors.

Galvanised or stainless steel screws may be preferred in exterior or corrosive environments while galvanized nails may be used for securing saddles in most interior applications.

Where it is being used in a horizontal plane it is recommend that saddles be fixed at intervals not exceeding 500mm and 1000mm in a vertical plane. Allow provision for expansion and contraction where required.

Joining
Marley SUPA cannot be joined with PVC solvent cement. Use a conduit gland, plain to screw adaptor, or specialised silicon.

 

The Ultimate Defence

Using an application-based approach, the Marley ARMA® range is simplified to save space in your vehicle and time at the work site, while achieving a long lasting, professional finish each and every time.

Independently verified to comply with AS/NZS 61386, the Marley ARMA® rigid conduit system is proudly made in New Zealand and 100% recyclable.

View