Marley FL2®

The Marley FL2® spouting system epitomises the minimalist look with ultra-clean lines and a bold front face. Available with internal or external bracket options.


  • About

  • Components

  • Technical

FL2A STRONG FACE

The high front edge of FL2® captures large water flow and masks untidy roof edges. The clean face also offers a subtle design to complement any roof line. FL2® is available with internal brackets for a smooth finish or external brackets for ease of cleaning.

TOUGH AND LONG LASTING
Marley FL2® spouting is manufactured from uPVC. uPVC is an extremely tough and long-lasting material that will not rust, requires little maintenance and is UV resistant. All FL2® components come with a 15-year guarantee.

 

  • 15 Year Guarantee
  • Will not rust
  • Made
    in NZ
  • 100% Recyclable
  • U.V. Resistant
  • Design Inspired
Marley FL2<sup>®</sup>
Product
Component
Code
FL2 SPOUTING<br />
3m Length
FL2 SPOUTING
3m Length
FL1.3
INTERNAL BRACKET<br />
INTERNAL BRACKET
FL2I
LH SPOUTING<br />
STOPEND
LH SPOUTING
STOPEND
FL3
SPOUTING JOINER
SPOUTING JOINER FL5
EXTERNAL ANGLE 90°
EXTERNAL ANGLE 90° FL6
EXPANSION OUTLET<br />
65mm
EXPANSION OUTLET
65mm
FL8.65
OUTLET STOPEND LH
OUTLET STOPEND LH FL8.LH
DROPPER OUTLET<br />
65mm
DROPPER OUTLET
65mm
MC11.65
DROPPER OUTLET<br />
80mm
DROPPER OUTLET
80mm
MC11.80
SOLVENT WELDING CEMENT<br />
180g Tube
SOLVENT WELDING CEMENT
180g Tube
MCS
Product
Component
Code
FL2 SPOUTING<br />
5m Length
FL2 SPOUTING
5m Length
FL1.5
EXTERNAL BRACKET<br />
EXTERNAL BRACKET
FL2E
RH SPOUTING<br />
STOPEND
RH SPOUTING
STOPEND
FL4
EXPANSION JOINER
EXPANSION JOINER FL17
INTERNAL ANGLE 90°
INTERNAL ANGLE 90° FL7
EXPANSION OUTLET<br />
80mm
EXPANSION OUTLET
80mm
FL8.80
OUTLET STOPEND RH
OUTLET STOPEND RH FL8.RH
OUTLET STRAINER
OUTLET STRAINER RWST
DROPPER OUTLET<br />
100 x 50mm
DROPPER OUTLET
100 x 50mm
MC11.100.50
GALVANISED NAILS<br />
PACKET 150
GALVANISED NAILS
PACKET 150
MCNAILS
Marley FL2<sup>®</sup>

Effective Cross Sectional Area: 4800mm2

Flow Capacity: 65 litres/minute

Material: uPVC (Unplasticised PVC)

Minimum Recommended Fall: 1:2000

Bracket System: Internal and External bracket options. Both to be spaced at max 500mm centres (reduce to 300mm in high wind or snow prone areas). All Marley Spouting bracket systems create + maintain a 10mm gap between the fascia and the back face of the spouting to allow water to spill to the exterior of the building envelope (as recommended in BRANZ Technical Bulletin Issue 509, “Sizing Gutters and Downpipes”, Clause 4.01).

Spouting Capacity:

Rainfall Intensity*
(mm/hr)
40 50 60 70 80 90 100 110 120 130 140 150
Maximum Catchment
Area per downpipe(m²)
97 78 65 56 49 43 39 35 32 30 28 26


* As per NZBC E1 – Surface Water, Rainfall Intensity equates to a 1 in 10 year storm and varies depending on geographic location. For example, 100mm/hr is a general rule of thumb for the Auckland region however please refer to hirds.niwa.co.nz for current rainfall intensity specific to your location.

Certified for use with potable water? Yes (certified to AS/NZS 4020)

Environmental certification: ISO 14001, BEP certification

Compatible Marley Downpipe systems: RP80® 80mm Round DownpipeRP65® 65mm Round Downpipe, Rectangular downpipe

Recommended Solvent: Marley MCS® Solvent Cement – White (Item Code: MCS)

INSTALLATION

Marley spouting and downpipes are intuitively designed as a modular system, making repair and replacement much simpler. There is a technical element to installing Marley spouting so if you are unsure, Marley recommends you seek advice from a trade professional. Alternatively for a step by step DIY guide, please click here.