Marley Classic™

The Marley Classic spouting system is based on an original Roman design. The Classic spouting shape is particularly suited to villas and colonial style houses.


  • About

  • Components

  • Technical

Classic-Profile-PictureManufactured in New Zealand since the 1980s, Marley Classic is synonymous with typical kiwi villas and traditional colonial style homes. Classic has internal brackets for a smooth finish and is compatible with all Marley downpipe systems.

SHARP STYLE

Classic’s sharp, angular lines makes it ideal for framing weatherboard-style houses and the high front face conceals the roof edge visually whilst also protecting the building envelope from the elements.

TOUGH AND LONG LASTING

Marley Classic spouting is manufactured from uPVC. uPVC is an extremely tough and long-lasting material that will not rust, requires little maintenance and is UV resistant. All Classic components come with a 15-year guarantee.

  • 15 Year
    Guarantee
  • Will Not
    Rust
  • Made
    in NZ
  • 100%
    Recyclable
  • UV
    Resistant
  • Design
    Inspired
Marley Classic™
Product
Component
Code
CLASSIC SPOUTING<br />
3m Length
CLASSIC SPOUTING
3m Length
MC1.3
SPOUTING BRACKET<br />
SPOUTING BRACKET
MC2
RH COMBINATION<br />
STOPEND
RH COMBINATION
STOPEND
MC4
EXPANSION JOINER
EXPANSION JOINER MC17
EXPANSION OUTLET 65mm<br />
EXPANSION OUTLET 65mm
MC8.65
EXPANSION OUTLET 80mm<br />
EXPANSION OUTLET 80mm
MC8.80
DROPPER OUTLET<br />
65mm
DROPPER OUTLET
65mm
MC11.65
DROPPER OUTLET<br />
100 x 50mm
DROPPER OUTLET
100 x 50mm
MC11.100.50
GALVANISED NAILS 150 Per Packet
GALVANISED NAILS 150 Per Packet MCNAILS
Product
Component
Code
CLASSIC SPOUTING<br />
5m Length
CLASSIC SPOUTING
5m Length
MC1.5
LH COMBINATION<br />
STOPEND
LH COMBINATION
STOPEND
MC3
SPOUTING JOINER
SPOUTING JOINER MC5
EXTERNAL ANGLE 90°
EXTERNAL ANGLE 90° MC6
INTERNAL ANGLE 90°
INTERNAL ANGLE 90° MC7
OUTLET STRAINER
OUTLET STRAINER RWST
DROPPER OUTLET<br />
80mm
DROPPER OUTLET
80mm
MC11.80
WELDING SOLVENT 180g Tube
WELDING SOLVENT 180g Tube MCS
Marley Classic™

Effective Cross Sectional Area: 6700mm²

Flow Capacity: 97 litres/minute

Material: uPVC (Unplasticised PVC)

Minimum Recommended Fall: 1:2000

Bracket System: Internal brackets. To be spaced at max 500mm centres (reduce to 300mm in high wind or snow prone areas). All Marley Spouting bracket systems create + maintain a 10mm gap between the fascia and the back face of the spouting to allow water to spill to the exterior of the building envelope (as recommended in BRANZ Technical Bulletin Issue 509, “Sizing Gutters and Downpipes”, Clause 4.01).

Spouting Capacity:

Rainfall Intensity*
(mm/hr)
40 50 60 70 80 90 100 110 120 130 140 150
Maximum Catchment
Area per downpipe(m²)
146 117 97 83 73 65 58 53 49 45 42 39


* As per NZBC E1 – Surface Water, Rainfall Intensity equates to a 1 in 10 year storm and varies depending on geographic location. For example, 100mm/hr is a general rule of thumb for the Auckland region however please refer to hirds.niwa.co.nz for current rainfall intensity specific to your location.

Certified for use with potable water? Yes (certified to AS/NZS 4020)

Environmental certification: ISO 14001, BEP certification

Compatible Marley Downpipe systems: RP80® 80mm Round Downpipe, RP65® 65mm Round Downpipe, Rectangular downpipe

Recommended Solvent: Marley MCS® Solvent Cement – White (Item Code: MCS)

INSTALLATION

Marley spouting and downpipes are intuitively designed as a modular system, making repair and replacement much simpler. There is a technical element to installing Marley spouting so if you are unsure, Marley recommends you seek advice from a trade professional. Alternatively for a step by step DIY guide, please click here.