|Sizes available||20, 25mm||20 – 50mm||20 – 32mm|
|Comply with AS/NZS
|Duty rating**||Very light duty||Medium duty||Heavy duty|
|Long-term outdoor use||No||No||Yes|
|Temperature range**||-5°C to +60°C||-5°C to +60°C||-5°C to +60°C|
|Marley solvent needed to
* Avoid contact with ketones, esters, aromatic and chlorinated solvents
** As per manufacturing standard AS/NZS 2053
INSTALLATION OF EASI FLEXIBLE CONDUIT
Although it is designed for use above ground it can also be used in buried applications. Please refer to the wiring installation standard AS/NZS 3000 for guidance.
Where conduits are to be surface mounted, secure to the building fabric with the correct size saddles or conduit clips using zinc plated or stainless steel screws into wood or masonry anchors. Galvanised or stainless steel screws may be preferred in exterior or corrosive environments while galvanized nails may be used for securing saddles in most interior applications.
Where being used in a horizontal plane it is recommend that saddles be fixed at intervals not exceeding 600mm and 1000mm in a vertical plane. Allow provision for expansion and contraction where required.
Where conduits are to be embedded in concrete the conduit should be secured from being displaced during pouring and vibrating by securing to the formwork or reinforcing.