Marley MCS® Solvent Cement is specifically formulated to bond together the components of Marley spouting and downpipe systems and helps to ensure a long-lasting, water tight joint is achieved. Only use Marley solvent cement when installing Marley spouting and downpipe.
Click here for the Material Safety Data sheet for Marley Solvent Cement.
Surface areas to be joined must be clean, dry and free from burrs.
Marley MCS® Solvent Cement should be applied evenly to both surfaces being joined. Then press both surfaces together and hold for 20-30 seconds.
Any surplus solvent cement should be removed immediately with a damp, clean, lint free cloth. Leave sitting for 10 minutes.