Non Pressure Systems

PVC DWV SYSTEM
	Marley Optim, U-PVC (32DN up to 375DN) and Marley Impact, M-PVC (100DN up to 375DN) are both available from SN4 up to SN16. Solvent joint and rubber ring joint options available. image of range	download pdf
AKATHERM AKAVENT
	A specifically designed stack system for high-rise buildings. Manufactured from High Density Polyethylene (HDPE), the Akatherm Akavent reduces the number of stacks required within the building. Visit www.akatherm.com to find out more.	download pdf
POLIPHON new
	Manufactured from Polypropylene (PP), the Poliphon system uses multi-layer material technology to provide soundproof quality that reduces noise levels to acceptable volumes. Go to www.poliplast.pl/en to find out more. Marley Branz Appraisals for Poliphon - part 1 - part 2 -	download pdf
STORMWATER SYSTEM
	Marley Stormline solid wall pipe is manufactured from Uplasticised PVC (U-PVC). Range is available with solvent joint or rubber ring joint at SN4.	download pdf
REDI LARGE DIAMETER FITTINGS new
	REDI large diameter fittings are designed for non-pressure applications including stormwater, commercial rainwater and rural installations. The uPVC fittings have parallel-socket solvent joints and come in 175DN, 225DN and 300DN sizes. Go to www.redi.it to find out more. Image of range	download pdf
NON-RETURN VALVE
	A simple and effective way to eliminate flood risk by backflow through drainage channels. New Zealand Building Code require provision to be made to protect a building where surcharge may occur. Go to www.redi.it to find out more.	download pdf
MAINTENANCE ACCESS SHAFTS
	Developed to eliminate problems of stormwater infiltration into the wastewater network and provide a cost effective, safe point of access for maintenance and inspection equipment.	download pdf
CONCRETE SLAB ADAPTERS
	Used when the Drain, Waste and Vent (DWV) pipe has been broken off at or below slab level, and the plumber needs to connect a new pipe into the broken pipe end.	download pdf
WASTE WATER PRE-TREATMENT PRODUCTS
	Used to remove solids from waste water preventing them from entering the infrastructure. This product line has been discontinued. For more information please visit the DUX website or click here.
JOINTING PROCEDURES
	Recommended procedure to join two ends with a rubber ring joint or with solvent cement.	download pdf
MATERIAL SAFETY DATA SHEETS
	Physical description, properties, classification and health hazard information. Marley Gold and Clear Cement Primer Lubricants	- download - - download - - download -